MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Calgary LRT (C Train) - Siemens SD 160Passenger
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Calgary LRT (C Train) - Siemens SD 160
This is a model of the newer version of the Calgary LRT or C Train. The actual train is the SD 160, manufactured by Siemens.
About this creation
Calgary Transit currently runs 2 different types of C Trains. This is the newer version and is a Siemens SD 160. The older version is a Siemens U2 which I also MOC'd here.

The C Trains typically run in 3 car configurations. I built 2 of these trains simultaneously (which is probably why it took me 6 months to finish this MOC). I have included photos of both the model and the actual C Train below.

Pictures of the entire train (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160
Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160


The decals took me a long time to make (like 30+ hours). In the end though I think it made the model look quite realistic particularly along the sides.

Pictures of the side (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160


The front of the train was the part that I spent the most time experimenting with. The key features I wanted to accommodate were the wedge type nose, real windows and also fit the 4 wide light block. Eventually I settled on using train doors as panels that I angled in towards the front of the train. Although this was not an ideal solution I think it turned out to be the best one to accommodate the features I wanted. Once the decals were applied I could almost forget that the sides were actually door elements. :)

Pictures of the front (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160
Calgary LRT (C Train) - Siemens SD 160


I used the same type of sliding joint and elastic mechanism for the middle joint that I used on my U2 model. Once again I must credit David VinZant and his TGV model for giving me the original idea. I was able to use some of the internal poles to hold the elastic in place.

Pictures of the joint (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160
Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160


The roof can be removed in 6 chunks for ease of access. I was quite happy with how the pantograph assembly turned out. I was able to include the red electical isolators, some pieces that looked like springs and even managed to create a V shaped arrangement of the structure similar to the actual one.

Pictures of the roof (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160


The inside provides lots of seats for minifigs rushing to work! I only placed chairs on 1 side so that I could keep an aisle in this 6 wide arrangement.

Pictures of inside (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160



The front cab houses a custom made LED light. I want to thank Roy Nelson of the Southern Alberta Lego Users Group (SALUG) for his hard work in making this for me. I could not fit a standard lego light brick in the cab so I went with the LED and I am quite happly with it because it is much brighter. Also, I went with a 9V battery box to run the light (instead of the motor). This had several advantages including the light not dimming or going off when the motor was going slowly or stopped.

Pictures of the inside - front cab (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160


I wasn't able to accommodate a standard train base (though I tried) and ended up using a flat bottomed train with tiles on top of the wheelsets. This worked out quite well and the wheelsets swivel freely. I made the top of the wheelsets gray so that it blended with the stickers on the side.

Pictures of the wheel sets (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160


More information on both types of C Trains and Calgary Tranisit in general is available here.

Here are some pictures of the SD 160 and the U2 models together. Also, there is a picture of the trains at the
Calgary Zoo Station (click on photos to enlarge)

Calgary LRT (C Train) - Siemens SD 160 Calgary LRT (C Train) - Siemens SD 160

Calgary Zoo Station






Comments

 I like it 
  November 23, 2011
Awesome model I must say, let me know if your interested in a real HO model in the old colours. I have an Edmonton one too. cdnplaneguy@hotmail.com
 I like it 
  October 30, 2011
Amazingly detailed. I love riding the C-Train or LRT as some call it.
 I like it 
  April 17, 2011
Great model- thanks again for inviting me inside the rope at Supertrain! :)
  January 2, 2010
Oh this is sweet. I live in calgary and im not sure i like the new color scheme though, i liked the old 1 better!!! I would love if you coud give me instructions, as i want to decal it with the old color scheme!!! The City of Calgary has barely any new trains in the old scheme, but the ones htat have it look awesome. Thanks
  April 23, 2009
Can i have your facebook it you haveone
 I made it 
  April 15, 2009
Quoting Michael McGough As a C-Train operator I would love to get model of what you have built. Please tell me how. Thanks, Badge 1213.
Thanks Michael for your comments and interest in my C Trains. I have had a few requests for replicas of the train. I'd like to tell you I could make you one but truthfully I wouldn't find the (month or so of) spare time to get it done. I should also warn you that it costs about $700 CDN for the 2000 or so Lego parts in a 3 car configuration like mine. If you are still keen to have one though I would be happy to share my knowledge of how I built mine so you could make your own. I will have my C Trains on display at the SuperTrain show in Calgary on April 18th and 19th. If you can make it, make sure you say hi and I can give you a closer look at my trains design and answer any questions on how I built it.
  April 4, 2009
are the doors real
 I like it 
  February 18, 2009
As a C-Train operator I would love to get model of what you have built. Please tell me how. Thanks, Badge 1213.
  February 18, 2009
As a C-Train operator I would love to get model of what you have built. Please tell me how. Thanks, Badge 1213.
 I like it 
  February 3, 2009
Excellent work! It has a very sleek look to it, and the cabin reminds me of the one of subway trains... Nice Job! Steffen
 I like it 
  February 2, 2009
hey Its me vincent I requested to join again excelent work as predicted from you.Im working on a lego verson on the calgary airport and was wondering how much does it take for you to make that c train for me ?
 
By Andrew Duff
Add to my favorite builders

13
people like this. See who.

9,735 visitors
11 comments
Added February 2, 2009
 


LEGO models my own creation MOCpages toys shop Calgary LRT (C Train) - Siemens SD 160Passenger


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use