MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop KAC PDW SOPMOD (working)Weapons
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
KAC PDW SOPMOD (working)
My new KAC PDW. Based on a Jack Streat design, the SOPMOD kit comes with: Folding stock, folding iron sights, working laser sights, and much more.
About this creation
It's been a while since I've posted any of my guns, but rest assured, I am still making them. I just have a lot of things to do outside of LEGO.

Anyways, here is my new KAC PDW. I had been wanting to make a small, automatic carbine for a while now, but it wasn't until recently that a fan by the name of rune 2650 asked me to make a KAC PDW. I wanted something small, because it turns out that when I made Jack's Lee Enfeild Jungle Carbine, I had a small amount of black bricks left over. And what is more cool than TWO Jack guns!? If you were wondering, the gun stands for Knight Armament Company Personal Defense Weapon. It's kind of a generic title if you ask me ;)

Now on to the pictures:


Just a quick overview. You can see some of the nice new features, like the open side picatiny RIS on the front of the barrel, and the folding sights and stock.



Not the best angle, but you can actually see through one side of the barrel to the other. Real guns have this feature so sand and debris don't get trapped around the barrel. Mine has it because it look awesome. You can also see the new flip up front sight. More on that later.



Sorry for the blur, my camera is pretty bad quality, and I am frankly amazed that all the pics didn't turn out this way.
The mag well, mag release, and handle are all the same as my old version of Jack Streat's HK416. Why fix what isn't broken? You can also see the raised sides along the barrel section. The gun would normally be 5 wide without them, but with them it gives the gun a much more realistic curve. With the enlargements it's 7 wide in some places.



The folding stock. This is NOT the same stock as my HK416, this one is more simplified.



A close up of the stock. You can detach the entire stock from the gun just by pulling out one rod (which you can see on the right). The blocky thing is what secures the stock to the gun when folded.



The stock closed. Sorry for the blur again.



A close up of the knob and mag release. The knob is what the stock block clips onto.



The rear folding sight. It's attached to the RIS integration thing.



A better pic of the front folding sight. It looks rather nice if you ask me. The middle prong is a lever arm held between two whatever you call those things. (I'm feeling to lazy to look up the real name on Bricklink)



My old Trijicon reflex that I stole from The Dawg. It slides onto the RIS integration thing.



Aiming down the Reflex.



Aiming down the reflex with the front sight up. You can see the lever as the middle prong.



Aiming down the Iron folding sights.



All sights folded down. You turn those knobs on the side to flip up the rear sight.



My old working red dot scope! I had to make a little conversion bracket so it would slide onto the RIS, but other than that, it's the same one that appeared on my HK416 and TAR-21.



The scope working. It normally is a bit brighter, but the battery was nearly dead.



What the cable looks like when the scope is on. It's not very stealthy, but it looks amazing.



The foregrip. Nothing new here.



With no sights or RIS integrator at all. Getting that many black 2x1s was crazy hard.



Looking into the gun with the top RIS off. You can see the charging handle and rubber bands that make this guy work.



Looking down into the gun with the charging handle off. You can see the hammer with the 4 rubber bands.



The all important inside. The trigger mech was all my idea, and took the longest time to get to work. If you didn't already know, this works just like one of Jack Streat's bolt action guns.



What it looks like with the magazine in the well.



Fully field stripped.



My favorite configuration, no stock, iron sights, and foregrip.



One final look at my smallest assault rifle yet. My cat Sharpay wouldn't stop sleeping on my white sheet! If you ever plan on photographing black LEGO guns, use a white sheet, it makes the quality of the pics SOOOOOO much better.
(Sharpay was not hurt in the making of this gun)

Anyways,
Rate
Comment
Subscribe
All criticism is fine, but no I WILL NOT POST INSTRUCTIONS.



Comments

 I like it 
  December 8, 2011
nice man you don't need to make instructions I will make from pics now I have famas from jack streat after that I will make that gun
 I like it 
  December 6, 2011
knights armament personnel defence wepoan. i have this but an airsoft version look at my creations and youll see it.
 I like it 
  October 6, 2011
Best one Iv'e ever seen!
  August 30, 2011
thanks mate, i wish i new how your RIS worked.... so when can we expect these instructions?? i cant wait
 I made it 
  July 16, 2011
Quoting SCARFACE MILLION i was wondering if you would mind telling me if i can use your ajustable iron sights? the protype one, see i am going to post a ARTIC CAMO assualt rifle and your iron sights (adjustable) are the main ones, thanks any way
Sure mate, I have no issues with you using my trusty iron sights!
 I like it 
  June 21, 2011
i was wondering if you would mind telling me if i can use your ajustable iron sights? the protype one, see i am going to post a ARTIC CAMO assualt rifle and your iron sights (adjustable) are the main ones, thanks any way
  June 19, 2011
edit: ok, here is the youtube link, as pics would be to hard to understand: http://www.youtube.com/watch?v=fzRkQsamCQg i hope you like it :)
 I like it 
  May 18, 2011
beast gun man! Do u think u can make an kriss super V or an PWS Diablo?
 I made it 
  May 11, 2011
Quoting Alexander Schueler Yea, those are a pain :P btw, are you done with the instructions? Also, I have a good ides for a locking mech for the stock, and a button type mag release, but one wouldn't be able to side fieldstrip it... :/
Well, I have the LDD part of the instructions done, but I've been procrastinating when it comes to taking the pictures of how to assemble the main components. Also, if you were to put up a MOC of the stock mech, maybe I can figure out a way to make it side-strippable.
  May 11, 2011
Yea, those are a pain :P btw, are you done with the instructions? Also, I have a good ides for a locking mech for the stock, and a button type mag release, but one wouldn't be able to side fieldstrip it... :/
 I like it 
  April 22, 2011
good job! looks like something streaty would make
 I made it 
  April 21, 2011
Quoting Alexander Schueler nice KAC! did you make that laser sight thing by useing an exo-force set? If so, I remember those :P
You remember! They are the same part. I wish LEGO made a better light element that had a better switch on it. Because the button is a push and hold type thing, it can be a real pain to work with.
 I like it 
  April 21, 2011
nice KAC! did you make that laser sight thing by useing an exo-force set? If so, I remember those :P anywho, I give it 10582/10582!!!
Jake Mackay
 I like it 
Paperweight .
  February 15, 2011
Nice job! I will be posting my 1st lego gun soon....
Jake Mackay
 I like it 
Izak Felder
  February 9, 2011
i mean how you can order off ldd if i got ldd and was to order jacks hk416 how much would it be
 I made it 
  February 9, 2011
Quoting Izak Felder i mean how you can order off ldd if i got ldd and was to order jacks hk416 how much would it be
Now that is a good question my friend... You can't buy it. A lot of the parts that Jack and I use are not being sold via LDD or Design by Me. You could get most of the body for around $100, methinks, but that wouldn't include a lot of the internal Technic parts. I got all my black parts by collecting a TON of sets. It can take years man, years.
Jake Mackay
Izak Felder
  February 8, 2011
you have ldd right? if sohow much would it be to order jacks gun instructions from there
 I made it 
  February 8, 2011
Quoting Izak Felder you have ldd right? if so how much would it be to order jacks gun instructions from there
I am currently working on instructions for this PDW, using LDD for the main parts, and pictures for the overall construction. I don't know when I will have those up, but it will be free.
 I made it 
  January 28, 2011
Quoting Izak Felder how many studs wide are jacks guns jake? 6?
All of his, and my guns are odd amounts wide. His are usually 5, in this case mine is 7, because I wanted to get the rounded shape on the side and barrel.
Jake Mackay
 I like it 
Izak Felder
  January 27, 2011
how many studs wide are jacks guns jake? 6?
Jake Mackay
 I like it 
Simon Knekta
  January 23, 2011
It would be cool if you built the DD M4 Carbine! Just a tip...
 I like it 
  January 22, 2011
EPIC
Jake Mackay
 I like it 
The italian gun
  January 16, 2011
AWESOME
 I made it 
  January 16, 2011
Quoting The italian gun AWESOME
Good to know you like it!
 I made it 
  January 13, 2011
Quoting Izak Felder i am not allowed to download on my families computer
Unfortunately I can't make everything perfect for everyone :( If you spend enough time looking at the pictures of the parts, maybe you can figure it out. After all, that's how I made ALL of my Jack Streat guns!
Jake Mackay
 I like it 
Izak Felder
  January 12, 2011
when will the instructions be out and when they are will there be instructions for jacks mechanism because i don't have ldd and can't get it
Jake Mackay
 I like it 
Izak Felder
  January 12, 2011
i am not allowed to download on my families computer
 I made it 
  January 12, 2011
Quoting Izak Felder when will the instructions be out and when they are will there be instructions for jacks mechanism because i don't have ldd and can't get it
Unfortunately for you, they will be in LDD, but I will show how to assemble the main parts using pictures. Lucky for you, you can get LDD for free here: http://ldd.lego.com/download/default.aspx I can't give a definite date as of yet, but I should be done with the LDD part tonight, then the photos will be done by the end of the week, so maybe this weekend.
 I made it 
  January 11, 2011
Quoting Bjarke Holmgaard Olsen Nice creations :-)
Thank you! And I plan to have many more to come. Everyone else, your prairs have been answered! Instructions are on their way for this gun and some of its attachments.
  January 11, 2011
Nice creations :-)
 I like it 
  December 16, 2010
my pistol instructions are now out ..... ///// .....
 I like it 
  December 16, 2010
Very nice, Jake! You really impressed me, with this creation. Keep it up, buddy! -Jan
 I made it 
  December 13, 2010
Quoting how 4ever This is just awesome!! how far can it shoot ?
As of now, not very far... Only 3~5 feet accurately. I still need to tinker with the internal rubber bands a bit so it can go more like 10~15 feet.
Jake Mackay
 I like it 
how 4ever
  December 12, 2010
This is just awesome!! how far can it shoot ?
 I like it 
  December 12, 2010
dude awesome cat. the gun is awesome too
 I like it 
  December 12, 2010
NICE that you put a shooting mechanism in it and iv'e never seen te extra RIS. also take a look at my KAC i made it a while ago
 I made it 
  December 12, 2010
Quoting THE ARROW you said no instructions how about a mech tutorial i asked for a tutorial no instructions
A tutorial you ask? I might be able to do that...
Quoting rune 2650 I violated it is the coolest gun you have built and to all you other fans so it was me who asked Jake Mackay whether he could build it
Good thing you remembered Rune, I'll go back and Edit it so you get your proper credit. Thanks for the request mate.
Jake Mackay
 I like it 
THE ARROW
  December 11, 2010
you said no instructions how about a mech tutorial i asked for a tutorial no instructions
 I like it 
  December 11, 2010
I violated it is the coolest gun you have built and to all you other fans so it was me who asked Jake Mackay whether he could build it
 
By Jake Mackay
Add to my favorite builders

30
people like this. See who.

5,432 visitors
39 comments
Added December 11, 2010
 


LEGO models my own creation MOCpages toys shop KAC PDW SOPMOD (working)Weapons


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use