MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop FN P90Weapons
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
FN P90
My second shooting SMG. Fires 8 shots in semi-auto. There's a video this time!
About this creation

The handgrip. I did something kinda like Pybrick.


I always love a gun with a brick built trigger. Now I finally made one!


The trigger pulled.


The mechanism. See it here. I like it because I don't have to worry about which gear to put the rubber band on.


Loaded


I made the guard here differently than Pybrick and J.J. did.


The ammo.


Fancy!


The iron sights.


My gun compared to the printout.


It fits perfectly over top.


All of my guns together. I didn't have to take apart anything. As you can see, the trigger guard on my Glock is missing. I accidently dropped it and the part of it fell in a vent. I only have 6 black cheese slopes and 2 just fell down a vent!


As you can see from the video, it's powerful and accurate.



Well, this is my P90. I wanted to make one after seeing J.J.'s and Jack's versions. The one thing I don't like about it is that I had to make the area right before the sights thicker for the mechanism. Other than that I'm fine. I like the trigger, it fires well and is very comfortable in my hands. I also like how it looks like I have a real magazine loaded.



Here's a W.I.P. for my first castle themed build. I still have a lot to do.






If you liked it. Then please comment or rate! That means you anyone who doesn't build guns!




Comments

 I like it 
  August 18, 2013
Sweet model bro! check out mine, turned out prty sweet
 I like it 
  December 18, 2011
Increadable! Nice work just one thing, the spinney thing sticks out of the top. Good job though it looks good and be proud of yourself!!!!
 I made it 
  June 25, 2011
Quoting A Dying Breed Nice! I am building my own FN P90 and do not have the dimensions...would you happen to have the length of the gun in studs from the butt of the stock to where the stock drops off to make the first thumbhole hole?
Your guess is as good as mine. This gun is long gone
Chas Irish
 I like it 
A Dying Breed
  June 24, 2011
Nice! I am building my own FN P90 and do not have the dimensions...would you happen to have the length of the gun in studs from the butt of the stock to where the stock drops off to make the first thumbhole hole?
 I like it 
  January 27, 2011
LOVE IT!!!! P90's rock!
Chas Irish
 I like it 
Sagar Dighe
  June 25, 2010
This is a very good replica of the FN P90, like the rest of your guns, but I especially like your mechs, and I might just use one. The only thing is that the front handle is a bit to high, so it looks a little awkward, but the rest is great! I didn't even notice the little thick part behind the sights. You shouldn't have mentioned it...
Chas Irish
 I like it 
Sagar Dighe
  June 25, 2010
This is a very good replica of the FN P90, like the rest of your guns, but I especially like your mechs, and I might just use one. The only thing is that the front handle is a bit to high, so it looks a little awkward, but the rest is great! I didn't even notice the little thick part behind the sights. You shouldn't have mentioned it...
 I like it 
  June 23, 2010
you are amazing!
 I like it 
  June 23, 2010
you are amazing!
 I like it 
  May 22, 2010
this is one of the best P90 MOCS I have ever seen!!!The p90 is my second favorite gun(other than the F2000).I especially love the way you used that claw thing to hold the rubber bands instead of a gear.Awesome.
 I like it 
  May 7, 2010
OMG! OMG! OMG! I have an airsoft just like it. AWESOME MOC!
 I like it 
  April 12, 2010
I always love toy guns that actually shoot well and are sturdy enough. I'm going to check out the mechanism and see if I can do a couple of SF versions, or fantasy. Good stuff, Bro- keep on stackin' -Huss Q.
 I like it 
  November 22, 2009
Nice job! This seems very accurate, both the shooting and the details. Great job.
Chas Irish
 I like it 
Danien Berends
  November 1, 2009
probably the best p90 i have ever seen on mocs and it shoots rubber bands
Chas Irish
 I like it 
Jasper Jasper
  June 14, 2009
It is amazing!! I'm very curious how the trigger works:P 5/5!
 I like it 
  May 27, 2009
Just Amazing!!!!!
 I like it 
  May 22, 2009
I'm impressed!
 I made it 
  May 21, 2009
Quoting Lucas Keeney Were you able to fix this right when you dropped it on Sunday?
It turns out that I did put it back together right. It works better now than it did before! I can shoot it faster.
 I like it 
  May 21, 2009
Were you able to fix this right when you dropped it on Sunday?
 I like it 
  May 19, 2009
I think you did a excellent job on this!!!!!
 I like it 
  May 15, 2009
awesome gun. will you look at mt first lego gun and see if its any good? thanks
 I like it 
  May 3, 2009
sweet. not one for the rbg, but good. i love the shape of this and tried once but failed.
Chas Irish
 I like it 
Anders Carey
  April 27, 2009
Nice! It looks really cool, I watched the vid and I can't believ how accurate it is. Overall, it's awesome, 5/5 check out my MOCs i don't have many posted yet tho... anyway, nice gun!
 I made it 
  April 25, 2009
Quoting Milan CMadge Chas - I love your creations! your amazing at making guns!! P.S: Do you know of any good brick shooting mechanisms
You just noticed that? Ha Ha. I'm just kidding. Thanks a lot. I don't have a lot of technic pieces so I tend to stay away from brick shooters, although I would love to make one. Check out Jack streats mechanisms. They are the best I've seen on the pages. http://mocpages.com/home.php/13860
 I like it 
  April 25, 2009
Chas - I love your creations! your amazing at making guns!! P.S: Do you know of any good brick shooting mechanisms
 I made it 
  April 24, 2009
Quoting Toby Heinemann
Quoting Chas Irish The reason I don't have the sights is because of the rubber bands. I would be hard to load the gun with the sights in the way. I wish i could have added them though.
Maybe you could revise it so that the entire 'sight' assembly pivots forward? That would put the bottom of the sight block in front of the knob the rubberbands have to wrap around, and keep the midsection open for loading. I don't know if you can do this based on how you constructed it, but it's a thought.
That's what I was planning on doing, except I ran out of pieces. All my other pieces are in my other 3 guns.(which you should check out if you haven't already) If you want to see this method used go here: http://www.mocpages.com/moc.php/108332 He made a video also.
  April 24, 2009
Quoting Chas Irish The reason I don't have the sights is because of the rubber bands. I would be hard to load the gun with the sights in the way. I wish i could have added them though.
Maybe you could revise it so that the entire 'sight' assembly pivots forward? That would put the bottom of the sight block in front of the knob the rubberbands have to wrap around, and keep the midsection open for loading. I don't know if you can do this based on how you constructed it, but it's a thought.
 I like it 
  April 22, 2009
Sorry I haven't been able to talk in a long time, My MOCcomparison ship just like exploded(no other way to put it) and I just haven't had enough time to be active on Moc. ~S.K.
 I made it 
  April 21, 2009
Quoting Toby Heinemann This is quite good! I'll admit I only noticed it because you commented on my stuff, but the fact remains that it's an incredibly accurate, full-scale replica. My only issue with it is that the upper part of the receiver has an incorporated iron sight and red dot sight on the real gun, and not simply the two large sides projecting above the magazine. The fact that it's a functioning rubberband gun at the same time is impressive as well. Great job!
The reason I don't have the sights is because of the rubber bands. I would be hard to load the gun with the sights in the way. I wish i could have added them though.
 I like it 
  April 21, 2009
This is quite good! I'll admit I only noticed it because you commented on my stuff, but the fact remains that it's an incredibly accurate, full-scale replica. My only issue with it is that the upper part of the receiver has an incorporated iron sight and red dot sight on the real gun, and not simply the two large sides projecting above the magazine. The fact that it's a functioning rubberband gun at the same time is impressive as well. Great job!
 I made it 
  April 21, 2009
Quoting Jack Streat nice job. its a bit more realistic than mine coz its got less holes in!;-) too bad you could only get 8 bands on it tho, i managed 20!
Yours was great!
Quoting Chris A. sweet. the only thing i dont like is that the mech is sticking out of the top.
My mechansim was too big to fit it inside. Believe me, I would have wanted it inside.
 I like it 
  April 21, 2009
sweet. the only thing i dont like is that the mech is sticking out of the top.
 I like it 
  April 21, 2009
nice job. its a bit more realistic than mine coz its got less holes in!;-) too bad you could only get 8 bands on it tho, i managed 20!
 I like it 
  April 21, 2009
Awesome P90! :)
Chas Irish
 I like it 
Marco P Replicas
  April 20, 2009
Really nice you're getting better and better with every creation! im looking forward to see your next gun and the castle:) Greets Marco P Replicas
 I like it 
  April 20, 2009
Excellent
 I like it 
  April 19, 2009
Yeah, fourty bucks doesn't get you much if you want to make an actual castle. I have yet to do that.
 I like it 
  April 19, 2009
wow! nice p90! and all black :)
Chas Irish
 I like it 
Callum King-Underwood
  April 18, 2009
I love P90s. Ive made a semi auto rubber band mechanism but haven't taken pictures yet cos i lost the rubber bands test firing in the garden. Mines tested with 2 rubber bands but it will hold more i think. I might have to build a P90 around it until i get some more rubber bands. Either that or some kind of rifle
 I like it 
  April 18, 2009
Excellent! Great design. As for the castle...GREAT work so far! That is looking very cool. Landscaping, everything!
 I like it 
  April 18, 2009
Awsome job!
 I like it 
  April 18, 2009
Very nice. Your definately in the rank of builders like JJ and me! I have always liked this and you did a nice job. Keep it up!
  April 18, 2009
Nice! It works as beautifully as it looks! From what I can see, that castle build looks spectacular! Pce ~:Thomas:~
 I like it 
  April 18, 2009
Nice! The shape is so accurate, and it seems to work well! Nice looking WIP you have coming!
 I like it 
  April 18, 2009
Wow, this is a pretty cool FN P90 you made. Very hard to see some like this. I like how you used all the same color, unlike some poeple who made this. Hope ro see more from you. ~ Ghostmn :)
 I like it 
  April 18, 2009
Very nice gun Chas!!!1
 I made it 
  April 18, 2009
Quoting Jongejanssie Jongejanssie
Quoting Chas Irish Thanks for the comment, but when I lay the image over my printout it looks fine.
Well, OK, than it's just me.
I could be wrong too.
 I like it 
  April 18, 2009
Quoting Chas Irish Thanks for the comment, but when I lay the image over my printout it looks fine.
Well, OK, than it's just me.
 I like it 
  April 18, 2009
i'd say thats one of your best guns yet! ~CK#9
 I made it 
  April 18, 2009
Quoting Jongejanssie Jongejanssie This FN P90 is just too nice for words! I can't help, but to me you need to make the stock a brick higher, but I can be wrong. Very nice P90! 5/5!
Thanks for the comment, but when I lay the image over my printout it looks fine.
 I like it 
  April 18, 2009
5/5 awsome p90
 I like it 
  April 18, 2009
This FN P90 is just too nice for words! I can't help, but to me you need to make the stock a brick higher, but I can be wrong. Very nice P90! 5/5!
 
By Chas Irish
Add to my favorite builders

62
people like this. See who.

8,962 visitors
53 comments
Added April 18, 2009
 


LEGO models my own creation MOCpages toys shop FN P90Weapons


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use