MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop eXtreme TFOLs
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Conversation »
Dream Lego Pieces
Join to comment
(I have permission, BTW)
I don't want you to say something MB has done, or Halo stuff... I want you to be creative, and think of pieces that would be cool, and helpful.

I LOVE cheese slopes, and would love some more versions of it... eg.- a stud on the slope, have 2 angles on it, have it inverted, so the slope is down, with the stud on top... the ideas are endless!
Permalink
| May 7, 2012, 9:59 pm
Quoting The Timinater !
(I have permission, BTW)
I don't want you to say something MB has done, or Halo stuff... I want you to be creative, and think of pieces that would be cool, and helpful.

I LOVE cheese slopes, and would love some more versions of it... eg.- a stud on the slope, have 2 angles on it, have it inverted, so the slope is down, with the stud on top... the ideas are endless!


Sheep :3

Permalink
| May 7, 2012, 10:05 pm
Quoting E. B.

Sheep :3

nice!

a cheese slope that looks like this /

I like chees slopes! :D
Permalink
| May 7, 2012, 10:15 pm
 Group admin 
Quoting The Timinater !
(I have permission, BTW)
I don't want you to say something MB has done, or Halo stuff... I want you to be creative, and think of pieces that would be cool, and helpful.

I LOVE cheese slopes, and would love some more versions of it... eg.- a stud on the slope, have 2 angles on it, have it inverted, so the slope is down, with the stud on top... the ideas are endless!

Agreed, they do need to modify the piece a bit because over time, it cracks down the middle. But that was 2005, maybe they fixed it by now. I would love an inverted one. as well.
Permalink
| May 8, 2012, 8:33 am
Quoting MCLegoboy !
Agreed, they do need to modify the piece a bit because over time, it cracks down the middle. But that was 2005, maybe they fixed it by now. I would love an inverted one. as well.

:( sad
Permalink
| May 8, 2012, 4:24 pm
I always wanted them to come out with this type of piece.

http://www.bricklink.com/catalogItem.asp?P=98138

Then they did. :')
Permalink
| May 8, 2012, 4:46 pm
 Group admin 
Quoting Legobob ~
I always wanted them to come out with this type of piece.

http://www.bricklink.com/catalogItem.asp?P=98138

Then they did. :')

You and me and everyone else man. I still don't have any though. :'(
Permalink
| May 8, 2012, 5:26 pm
Inverted super-earling
Permalink
| May 8, 2012, 5:26 pm
 Group admin 
Quoting Noah Gistover
Inverted super-earling

Are you sugesting ... O.O
Permalink
| May 8, 2012, 5:29 pm
Quoting MCLegoboy !
Are you sugesting ... O.O

Yes. A 1x1 beam with four holes, one on each side. Imagine the possibilities!
Permalink
| May 8, 2012, 5:30 pm
 Group admin 
Quoting Noah Gistover
Yes. A 1x1 beam with four holes, one on each side. Imagine the possibilities!

Would it also accept technic pins?
Permalink
| May 8, 2012, 5:33 pm
Quoting Legobob ~
I always wanted them to come out with this type of piece.

http://www.bricklink.com/catalogItem.asp?P=98138

Then they did. :')

So RARE!!
Permalink
| May 8, 2012, 5:33 pm
Quoting MCLegoboy !
Would it also accept technic pins?

Yes. It would also be able to accept four technic half pins
Permalink
| May 8, 2012, 5:35 pm
 Group admin 
Quoting Noah Gistover
Yes. It would also be able to accept four technic half pins

No I mean just one pin like with the technic bricks: http://www.bricklink.com/search.asp?colorID=11&itemID=1527
Permalink
| May 8, 2012, 5:39 pm
Quoting MCLegoboy !
No I mean just one pin like with the technic bricks: http://www.bricklink.com/search.asp?colorID=11&itemID=1527

It could do that too. Just imagine that piece but with a hole on all of the sides.
Permalink
| May 8, 2012, 5:40 pm
 Group admin 
Quoting Noah Gistover
It could do that too. Just imagine that piece but with a hole on all of the sides.

Alright. Now I can really enjoy that.
Permalink
| May 8, 2012, 5:42 pm
Quoting MCLegoboy !
Alright. Now I can really enjoy that.

See why it would be fun. Imagine all the SNOTing possibilities it could unlock.
Permalink
| May 8, 2012, 5:44 pm
Quoting Noah Gistover
See why it would be fun. Imagine all the SNOTing possibilities it could unlock.

good idea!
Permalink
| May 9, 2012, 4:34 pm
I've always wanted a 1x1 brick with studs on two sides, but not parallel.
Permalink
| May 9, 2012, 4:48 pm
Quoting Owen S.
I've always wanted a 1x1 brick with studs on two sides, but not parallel.

That'd be great for corners...
Permalink
| May 9, 2012, 4:51 pm
Quoting Owen S.
I've always wanted a 1x1 brick with studs on two sides, but not parallel.

?
Permalink
| May 9, 2012, 5:31 pm
Quoting The Timinater !
?

Like, you know the brick that has studs on two sides (horizontally)? Take one stud and rotate it to one of the other sides so if you put two bars in the studs, they would be perpendicular.
Permalink
| May 9, 2012, 7:29 pm
Quoting Owen S.
Like, you know the brick that has studs on two sides (horizontally)? Take one stud and rotate it to one of the other sides so if you put two bars in the studs, they would be perpendicular.

ah... cool!

is that a 1x1 brick?
Permalink
| May 10, 2012, 3:18 am
a 1x4 technic brick with with four holes instead of three
Permalink
| May 11, 2012, 7:45 pm
I'd really want a 1x1 tile separator.I'd make my life so much easier. :3
Permalink
| May 11, 2012, 7:55 pm
Quoting Raviel Ze MOCist!
I'd really want a 1x1 tile separator.I'd make my life so much easier. :3

the brick seperater is also a good tile remover :)

of a small screwdriver ;)
Permalink
| May 12, 2012, 12:04 am
Quoting Jswish Productions
a 1x4 technic brick with with four holes instead of three

good idea!
Permalink
| May 12, 2012, 12:05 am
Quoting General Asher S.
I would LOVE to have a 3 stud long rod. (Like the one sused for lightsaber blades.)

they have made those :P
Permalink
| May 12, 2012, 12:05 am
Quoting The Timinater !
:( sad
I thought it was some imitation plastic! Like ABT plastic! Dun dun dun! But seriously, I have like 15 cheeseys that have cracked D:

Permalink
| May 12, 2012, 12:19 am
Quoting Nicholas O.
Quoting The Timinater !
:( sad
I thought it was some imitation plastic! Like ABT plastic! Dun dun dun! But seriously, I have like 15 cheeseys that have cracked D:

XD
sad :(
Permalink
| May 12, 2012, 12:21 am
Quoting The Timinater !
the brick seperater is also a good tile remover :)

of a small screwdriver ;)
How does it remove tiles?

Permalink
| May 12, 2012, 12:22 am
Quoting Nicholas O.
Quoting The Timinater !
the brick seperater is also a good tile remover :)

of a small screwdriver ;)
How does it remove tiles?

try it :)
Permalink
| May 12, 2012, 12:25 am
Quoting The Timinater !
try it :)
OH! Like, the edge of it? I have no idea where it went D: I am SO disorganized when it comes to Legos...

Permalink
| May 12, 2012, 12:25 am
Simple, but helpful (in my opinion), a 1x5 or 2x5 piece. Or, a 1x1 piece (1 stud high) with a stud on the side (like the piece that goes on a minifigures neck, and has the stud on the edge of it, like the backpack on the Agents helicopter).
Permalink
| May 12, 2012, 12:31 am
Quoting Nicholas O.
Quoting The Timinater !
try it :)
OH! Like, the edge of it? I have no idea where it went D: I am SO disorganized when it comes to Legos...

yep :)
Permalink
| May 12, 2012, 12:35 am
Quoting Nicholas O.
Simple, but helpful (in my opinion), a 1x5 or 2x5 piece.

Or, a 1x1 piece (1 stud high) with a stud on the side (like the piece that goes on a minifigures neck, and has the stud on the edge of it, like the backpack on the Agents helicopter).

good idea!

I suppose you mean a round one? good idea! great for curves!

or if not, they have made a square one :)
Permalink
| May 12, 2012, 12:36 am
My fingernails will be glad to hear that I can remove flat tiles with the separator :D
Permalink
| May 12, 2012, 12:39 am
Quoting Nicholas O.
My fingernails will be glad to hear that I can remove flat tiles with the separator :D

lol, yeah! :)

I use a knife blade, or a screwdriver :P

they're quicker :)
Permalink
| May 12, 2012, 12:41 am
Quoting The Timinater !
lol, yeah! :)

I use a knife blade, or a screwdriver :P

they're quicker :)

Ok it looks like knives are required to build Legos then!
Permalink
| May 12, 2012, 1:33 am
1x2 cheese slopes without vents. Aww yeaah.
Permalink
| May 12, 2012, 3:35 am
 Group admin 
Quoting Jswish Productions
a 1x4 technic brick with with four holes instead of three

I would see that as almost a waste because you just need twow of the 1x2's with the two holes and some bracings, but a 1x3 with two holes would be cool.
Permalink
| May 12, 2012, 7:06 am
 Group admin 
Quoting General Asher S.
I would LOVE to have a 3 stud long rod. (Like the one sused for lightsaber blades.)

Those exsist, but only in the Collecible Minifigures so far that I know of. They need to give one of those to Yoda.
Permalink
| May 12, 2012, 7:07 am
 Group admin 
Quoting Nicholas O.
My fingernails will be glad to hear that I can remove flat tiles with the separator :D

With enough force, it works, but my nails seem easiest for those. Plates, though, I'm all for the Brick Seperators, I just need to remember I have those. And get more than one of those, sometimes plate on plate builds are ridiculous to split.
Permalink
| May 12, 2012, 7:11 am
 Group admin 
Quoting Iceman .
1x2 cheese slopes without vents. Aww yeaah.

I agree, and why not just make a 1x1 cheese slope with vents just because.
Permalink
| May 12, 2012, 7:12 am
Quoting General Asher S.
I would LOVE to have a 3 stud long rod. (Like the one sused for lightsaber blades.)

I have one of those, it came with the series 5 viking.
Permalink
| May 12, 2012, 8:19 am
Quoting Seth .
I have one of those, it came with the series 5 viking.

I got one too!
Permalink
| May 12, 2012, 10:55 am
Quoting The Timinater !
the brick seperater is also a good tile remover :)

of a small screwdriver ;)

I mean like,smooth tiles. :P
Permalink
| May 12, 2012, 11:03 am
Quoting MCLegoboy !
just because.

Just because no.
Permalink
| May 12, 2012, 11:57 am
 Group admin 
Quoting Iceman .
Just because no.

It could be useful. I wouldn't have much of a need for it, nor do I need it for what it is now, but it could still work.
Permalink
| May 12, 2012, 5:41 pm
 Group admin 
Quoting Raviel Ze MOCist!
I mean like,smooth tiles. :P

That's the only type of tile there is, smooth. Plates have studs, tiles do not. There is a groove on the bottom of the piece, so they can be removed, but also with enough force, a brick seperator will work. If you have one of the Minifigure Crowbar/Prybar, that works also as a good tile remover.
Permalink
| May 12, 2012, 5:44 pm
1x1 cheese slopes with vents. Awww siiiii.
Permalink
| May 12, 2012, 5:51 pm
Quoting Seth .
I have one of those, it came with the series 5 viking.

I have around 7, including transparent ones :P
Permalink
| May 13, 2012, 4:44 pm
Quoting Iceman .
1x2 cheese slopes without vents. Aww yeaah.

yes!
Permalink
| May 13, 2012, 4:44 pm
Quoting General Asher S.
I would LOVE to have a 3 stud long rod. (Like the one sused for lightsaber blades.)

They have those.
Permalink
| May 13, 2012, 4:56 pm
The pieces that lego really should make are something like the brick arms u clips and mono pods.
Permalink
| May 13, 2012, 5:03 pm
Dark tan cheese is a must. They have all the slopes for rockwork, but it can't be cleaned up with cheese yet. :(
Permalink
| May 13, 2012, 5:49 pm
Quoting LukeClarenceVan The Revanchist
Dark tan cheese is a must. They have all the slopes for rockwork, but it can't be cleaned up with cheese yet. :(

Yes! more cheese slopes, and more colours would be awesome :P
Permalink
| May 14, 2012, 6:10 pm
Accurate weapons for clones, and a special lightsaber hilt for darth maul.
Permalink
| May 21, 2012, 5:39 pm
Quoting Noah G
Accurate weapons for clones, and a special lightsaber hilt for darth maul.

yeah, maybe :)
Permalink
| May 21, 2012, 5:42 pm
Quoting The Timinater !
yeah, maybe :)

Well they did do those specialized lightsabers for Dooku and Ventress, and with the return of Darth Maul on clone wars, it's highly possible.
Permalink
| May 21, 2012, 5:44 pm
Quoting Noah G
Well they did do those specialized lightsabers for Dooku and Ventress, and with the return of Darth Maul on clone wars, it's highly possible.

true...
Permalink
| May 21, 2012, 5:46 pm
 Group admin 
Quoting Noah G
Accurate weapons for clones, and a special lightsaber hilt for darth maul.

Quoting Noah G
Well they did do those specialized lightsabers for Dooku and Ventress, and with the return of Darth Maul on clone wars, it's highly possible.


The Darth Maul Saber would be nice. They did make one for the video game from 2005. As for the clones, I'm not all to worried about them. The reason the did that for Dooku and Ventress was that the two have such unique lightsaber hilts that a normal one would work, but just not be right. At least the existing ones have two peg holes. Oh and Darth Maul in the Clone Wars only has the one blade, he never crafted the second half so it's fine right now.
Permalink
| May 21, 2012, 6:01 pm
Quoting MCLegoboy !
The Darth Maul Saber would be nice. They did make one for the video game from 2005. As for the clones, I'm not all to worried about them. The reason the did that for Dooku and Ventress was that the two have such unique lightsaber hilts that a normal one would work, but just not be right. At least the existing ones have two peg holes.

Really I just meant for a slightly longer lightsaber hilt.
Permalink
| May 21, 2012, 6:02 pm
 Group admin 
Quoting Noah G
Really I just meant for a slightly longer lightsaber hilt.

I know what you meant, and I was refering to this picture:
http://rowm.com/images/Toy_Fair_2005/LEGO/Star_Wars/Video_Game/ConceptArt/DarthMaul.jpg
Permalink
| May 21, 2012, 6:08 pm
Quoting MCLegoboy !
I know what you meant, and I was refering to this picture:
http://rowm.com/images/Toy_Fair_2005/LEGO/Star_Wars/Video_Game/ConceptArt/DarthMaul.jpg

Oh. It's just I haven't played the game in a while.
Permalink
| May 21, 2012, 6:09 pm
 Group admin 
Quoting Noah G
Oh. It's just I haven't played the game in a while.

I just remember seeing on the back of the Instructions of sets. I don't play video games.
Permalink
| May 21, 2012, 6:14 pm
Quoting MCLegoboy !
Quoting Noah G
Oh. It's just I haven't played the game in a while.

I just remember seeing on the back of the Instructions of sets. I don't play video games.

I wasn't really into star wars back then.
Permalink
| May 21, 2012, 6:23 pm
I wish they had a lamp holder like brick (look it up on Lego's PAB I couldn't find it on bricklink) but with just the double sided part; like a double sided stud. Think of the SNOT possibilities...
Permalink
| May 31, 2012, 3:30 am
Minifig arms with muscles on them XD
Permalink
| July 2, 2012, 9:05 pm
I want to see a brick that has studs on ALL sides.
Permalink
| July 4, 2012, 9:45 am
Quoting Daniel Henson
I want to see a brick that has studs on ALL sides.

good one!
Permalink
| July 4, 2012, 4:13 pm
an iverted this: http://img.bricklink.com/P/11/6091.gif
Permalink
| July 4, 2012, 4:16 pm
I wish LEGO made more guns...
Permalink
| July 5, 2012, 4:55 am
 Group admin 
Quoting The Timinater !
an iverted this: http://img.bricklink.com/P/11/6091.gif

Not bad, and all its buddies like the one that is 4 studs long and the 1x3x3's. Also, why is there no inverted 1x4 slope and 2x4 slope? We've had the 2x4 slope a long time and it wasn't until a few years ago I saw he 1x4, yet there are no inverts. It is very interesting.
Permalink
| July 5, 2012, 1:57 pm
 Group admin 
Quoting Max Kester
I wish LEGO made more guns...

The ony way you would get that is from liscenced themes and if LEGO made a War Theme. There are absolutely no guns in LEGO City which is very interesting to me because Adventurers used guns and so did Pharoah's Quest, and even the Old West sets. Pirate's have had them and you find guns in a lot of liscenced themes, so what's wrong with a robber having your standard hand gun?
Permalink
| July 5, 2012, 2:03 pm
Quoting MCLegoboy !
Not bad, and all its buddies like the one that is 4 studs long and the 1x3x3's. Also, why is there no inverted 1x4 slope and 2x4 slope? We've had the 2x4 slope a long time and it wasn't until a few years ago I saw he 1x4, yet there are no inverts. It is very interesting.

true!
Permalink
| July 5, 2012, 3:54 pm
shorter lightsaber blades, different types of lightsaber hilts

specialised lightsaber staff pieces!

:0
Permalink
| July 6, 2012, 2:38 pm
 Group admin 
Quoting Chocolate Chipmunk
shorter lightsaber blades, different types of lightsaber hilts

specialised lightsaber staff pieces!

:0

They have three stud length bars, but they have only appeared in Collectible Minifigures. I wish they would just give Yoda one of those so his lightsaber could be not as much taller than he is. Custom hilts only happen when the hilt is more than just the standard straight hilt, although a longer hilt for double-bladed ones would be nice. Custom hilts would cost too much.
Permalink
| July 6, 2012, 3:54 pm
I want a few morelife-realistic shades of colours...
Permalink
| July 7, 2012, 6:05 pm
Quoting The Timinater !
I want a few morelife-realistic shades of colours...

For minifigures?
Permalink
| July 7, 2012, 9:27 pm
Quoting Noah G
For minifigures?

maybe... but I was thinking for bricks...
Permalink
| July 9, 2012, 12:48 am
you know those 2x2 bits with a corner bit missing? well it would be good if they as tiles, because then they can be better for snot

(If you guys get what I mean) :p
Permalink
| July 10, 2012, 10:37 am
 Group admin 
Quoting Chocolate Chipmunk
you know those 2x2 bits with a corner bit missing? well it would be good if they as tiles, because then they can be better for snot

(If you guys get what I mean) :p

There are many pieces I am surprised to see not being made. Although your idea has been thought up before, I think it wouldn't be all too helpful, but who knows, maybe it could.
Permalink
| July 10, 2012, 3:29 pm
I wish we would get a 2x2 modified brick with studs on all the sides except for the bottom
Permalink
| July 11, 2012, 12:54 pm
 Group admin 
Blowing off the dust on this bad boy :P


I think cheese slopes with grills would be awesome.
Permalink
| August 6, 2014, 4:46 pm
Quoting Noah G
I wish we would get a 2x2 modified brick with studs on all the sides except for the bottom
You mean sorta like these? https://img1.etsystatic.com/036/0/8672559/il_340x270.529160279_rq38.jpg

Permalink
| August 6, 2014, 5:43 pm
 Group moderator 
A CORNER Cheese slope. That would make life so easier. :)
Permalink
| August 7, 2014, 12:13 pm
 Group admin 
Quoting David .
A CORNER Cheese slope. That would make life so easier. :)

An iner Corner Cheese slope
And then an inverted version of the regular, the 1x2, and our corners.
Permalink
| August 7, 2014, 6:34 pm
Quoting MCLegoboy !
An iner Corner Cheese slope
And then an inverted version of the regular, the 1x2, and our corners.

And then a cheese slope that has a stud instead of a hole so you can add cheese slopes to the bottoms of bricks/plates/etc.
Permalink
| August 7, 2014, 7:04 pm
 Group admin 
Quoting David FNJ
And then a cheese slope that has a stud instead of a hole so you can add cheese slopes to the bottoms of bricks/plates/etc.

-_- Oh how you disappoint. That is exactly what an inverted cheese slope would be.
Permalink
| August 7, 2014, 8:00 pm
More 5x6 plates, or other odd-numbered plates like 5x1s and 7x1s.
Permalink
| August 8, 2014, 4:08 pm
 Group admin 
Quoting Sam Sanister
More 5x6 plates, or other odd-numbered plates like 5x1s and 7x1s.

I could see 1x5's in the future but any more and that's kind of pushing it with the odd numbered pieces.
Permalink
| August 9, 2014, 9:26 pm
 Group admin 
I think a 1x2 curved sloped corner piece would be awesome.
Permalink
| August 15, 2014, 11:50 am
A mixture of this http://www.bricklink.com/catalogItem.asp?P=4274 and this http://www.bricklink.com/catalogItem.asp?P=43093
Would be great for heart lights for any biomocers out there.
Permalink
| August 16, 2014, 12:11 pm
 Group admin 
Quoting Toa Chains
A mixture of this http://www.bricklink.com/catalogItem.asp?P=4274 and this http://www.bricklink.com/catalogItem.asp?P=43093
Would be great for heart lights for any biomocers out there.

So really, a shortenned version of this?
http://www.bricklink.com/catalogItem.asp?P=6587
Permalink
| August 16, 2014, 1:48 pm
Quoting MCLegoboy !
So really, a shortenned version of this?
http://www.bricklink.com/catalogItem.asp?P=6587

Yup!
Permalink
| August 16, 2014, 2:18 pm
Other topics
Random Facts 7 Updated yesterday
Guess The CMF 3! Updated Thursday



LEGO models my own creation MOCpages toys shop eXtreme TFOLs


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use