MOCpages : Share your LEGO® creations
LEGO models my own creation MOCpages toys shop Gun SmithsWeapons
Welcome to the world's greatest LEGO fan community!
Explore cool creations, share your own, and have lots of fun together.  ~  It's all free!
Conversation »
Gun help!
Join to comment
 Group moderator 
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


I'm stuck on a sniper problem. Does someone know a not-so modern sniper rifle, wich is semi-auto, and with a maximal lenght of 1,10 meters?
Permalink
| March 28, 2009, 8:28 am
 Group moderator 
Quoting Jongejanssie Jongejanssie
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


I'm stuck on a sniper problem. Does someone know a not-so modern sniper rifle, wich is semi-auto, and with a maximal lenght of 1,10 meters?


Well, you could do an M-14 with a scope, or a PTRS or a .55 inch Boys anti tank rifle. All of these are semi automatic and they aren't so modern.

Permalink
| March 28, 2009, 9:11 pm
 Group moderator 
Whatever a PTRS would be very awesome in lego. And if you could get it to shoot, it would be sick!
Permalink
| March 28, 2009, 9:56 pm
Quoting Bennit Elway
Isn't the Steyr AUG a sniper rifle? It's semi-auto and is about a meter long. And there aren't that many in service anymore either.

no, its an assault rifle. it is full a semi auto. if you pull the trigger halfway, it shoot semi and all the way, its full. yes, there are sniper variants. they have longer barrels and bigger scopes.
Permalink
| March 29, 2009, 2:04 pm
 Group moderator 
Now I'm stuck on an assault rifle. It needs to be an assault rifle from 1940-1990, have an underbarrel magazine and needs to have a maximal length of 90 cm. And no railsight!
Permalink
| April 4, 2009, 9:26 am
i need help on a bolt mechanism
Permalink
| April 4, 2009, 11:34 am
 Group moderator 
Quoting Jongejanssie Jongejanssie
Now I'm stuck on an assault rifle. It needs to be an assault rifle from 1940-1990, have an underbarrel magazine and needs to have a maximal length of 90 cm. And no railsight!


Well here are a list of just a few you could do: an Stg-44, Ak-47, M-14, FN FAL, Steyr Stg. 77, EM-2, AR-10, or a FAMAS. There are a few more but this should be of some help.

Permalink
| April 4, 2009, 5:18 pm
A German G43 i think its called that
Permalink
| April 13, 2009, 5:46 pm
try a Gewehr 43
Permalink
| April 13, 2009, 6:49 pm
 Group moderator 
Quoting Eric L try a Gewehr 43
That's correct: http://en.wikipedia.org/wiki/Gewehr_43

Permalink
| April 13, 2009, 7:20 pm
 Group moderator 
Quoting Marder II

Well, you could do an M-14 with a scope, or a PTRS or a .55 inch Boys anti tank rifle. All of these are semi automatic and they aren't so modern.

The PTRS-41 is very cool gun, and twice as powerfull as a .50BMG rifle, but it has a length of 2,10 meters. So that's way too long. BTW I don't play playstation games, but I heard that the PTRS-41 scores 9,5/10 points in case of damage. So making a PTRS-41 is just a dream come true.
Permalink
| April 18, 2009, 10:46 am
AWS The Artic Warfare Sniper Rifle, its used in Afghanistan. Its a short gun. Simple to make and is semi automatic. You pull the triger more than once and it fires all its clip.
Permalink
| April 18, 2009, 12:10 pm
AWS The Artic Warfare Sniper Rifle, its used in Afghanistan. Its a short gun. Simple to make and is semi automatic. You pull the triger more than once and it fires all its clip.
Permalink
| April 18, 2009, 12:10 pm
Quoting David Newton
AWS The Artic Warfare Sniper Rifle, its used in Afghanistan. Its a short gun. Simple to make and is semi automatic. You pull the triger more than once and it fires all its clip.

The AWS is a modified standard AW to use subsonic ammunition. Thus, the bullet flies at a speed below the speed of sound making minimum noise when firing. The supprssor is built into the barrel. It is the same principle as the DSR-1 Subsonic. The AWS is in no way semi-automatic. But it might be a good design for a Lego gun, having swapable barrels and all...
Permalink
| April 18, 2009, 12:40 pm
you could make a sr-47, although its full auto. it has a curved mag and has a design like a m-14.
Permalink
| April 18, 2009, 10:59 pm
Quoting Andrei Rozhin
Quoting Marder II

Well, you could do an M-14 with a scope, or a PTRS or a .55 inch Boys anti tank rifle. All of these are semi automatic and they aren't so modern.


My Barrett was like 57 in long...

Marder I don't think the PTRS fits his cateogory its about 2metres long.


Permalink
| April 19, 2009, 8:22 am
Well if the OPs got an idea, could I ask a question?

I'm going to make a lego rocket launcher (fires those large Mars Lander wheels / specially created missiles) but I don't know what to model the outside off. Mechs fine and is quite adaptable. I'm open to Rocket Launchers from games or RL.
Permalink
| April 20, 2009, 11:24 pm
can someone give ideas please
Permalink
| June 22, 2009, 8:32 pm
Quoting Jongejanssie Jongejanssie
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


I'm stuck on a sniper problem. Does someone know a not-so modern sniper rifle, wich is semi-auto, and with a maximal lenght of 1,10 meters?
Why not build an M1-carbine?

Permalink
| June 22, 2009, 11:50 pm
can someone send me instructions for a good lego gun that is complex i have all the good pieces.email me at bookwormwattson@yahoo.com for good lego instructions. sincerly iluvlegoguns
Permalink
| June 23, 2009, 7:37 am
i eill put a picture of one of my guns on my page as soon as can. thank you
Permalink
| June 23, 2009, 7:37 am
 Group moderator 
Quoting Bennit Elway Isn't the Steyr AUG a sniper rifle? It's semi-auto and is about a meter long.
The Styer AUG is an assault rifle. The longest one is the LMG (light machine gun) that is 0.9 m long. It is NOT a sniper rifle. http://en.wikipedia.org/wiki/Steyr_Aug
Permalink
| June 24, 2009, 12:46 pm
What's the shortest WWII rifle, I want to build a small WWII black rifle or Machine gun. Any suggestions, I don't know many.

Permalink
| June 24, 2009, 1:19 pm
 Group moderator 
Quoting Milan CMadge
What's the shortest WWII rifle, I want to build a small WWII black rifle or Machine gun. Any suggestions, I don't know many.

The shortest I know, is the M1a1 Carbine. It's a semi-automatic carbine of 90 cmīs long. The shortest machine gun I know is the M1919a4 of 1 meter long. Shorter than that it canīt be, machine guns are always pretty big.
Permalink
| June 24, 2009, 1:30 pm
Quoting PyBrick Replicas
Quoting Bennit Elway Isn't the Steyr AUG a sniper rifle? It's semi-auto and is about a meter long.
The Styer AUG is an assault rifle. The longest one is the LMG (light machine gun) that is 0.9 m long. It is NOT a sniper rifle. http://en.wikipedia.org/wiki/Steyr_Aug

There is a sniper variation for the AUG a3: http://world.guns.ru/assault/as20-e.htm (theres a pic of it near the bottom)
Permalink
| June 24, 2009, 2:08 pm
 Group admin 
I'm totally tapped out of ideas. Anyone have any suggestions or mechanism ideas?
Permalink
| June 24, 2009, 9:53 pm
Quoting Bohdan Tkachenko
I'm totally tapped out of ideas. Anyone have any suggestions or mechanism ideas?

I thought you were "retired".
Permalink
| June 24, 2009, 11:16 pm
 Group moderator 
Quoting Bohdan Tkachenko
I'm totally tapped out of ideas. Anyone have any suggestions or mechanism ideas?


Bohdan, you said you wanted to do a version of my W-27 pistols. That wouldn't be very challanging. You could also make that into a bolt action rifle if you wanted.

Permalink
| June 25, 2009, 12:00 am
can some one email me instructions for a lego uzi please at bookwormwattson@yahoo.com
Permalink
| July 16, 2009, 2:47 am
I've almost ran out of black bricks, so does anyone know any other coloured guns. I have a lot of white and light gray.

P.s: I'm going on holiday at 1:00pm (lunchtime) today, so I'll be offline until the 26th. So - Happy Building!! ~ Milan
Permalink
| July 16, 2009, 5:13 am
Quoting iluvlegoguns iluvlegoguns
can some one email me instructions for a lego uzi please at bookwormwattson@yahoo.com

look at bohdan's stuff he has instructions for an uzi
Permalink
| July 16, 2009, 11:03 am
Quoting Rtas 'Vadum
I am debating between 2 guns from Call of Duty 5; the Ray Gun and the Wunderwaffe DG-2. Which one should I make?

well, the ray gun would definately be easier.
Permalink
| July 16, 2009, 10:24 pm
 Group moderator 
Quoting chris legg

1.does some one know a good rubber band / brick shooting mech thats altleast semi auto

2. or a great working scope for snipers


Bohdan has a great high-capacity mech in his folder, you could modify that to shoot bricks. But it was made for just rubber bands. I just tried it out on a pistol, and I works great. By the way, I have two pistols to post coming up. So be on the lookout!

Permalink
| July 16, 2009, 11:28 pm
 Group moderator 
Quoting chris legg


never mind about the scope i figured out the best one ever i will post it on my page on wensday


Dude, I have to post the first ever magnifying lego scope! I just finished it yesterday, and it really works!
Permalink
| July 28, 2009, 2:14 pm
i have made a laser pointer attachment for a gun using a light brick and two magnifying glasses that worked very well but it was too long for a pistol
Permalink
| July 28, 2009, 4:24 pm
Quoting Marder II
Whatever a PTRS would be very awesome in lego. And if you could get it to shoot, it would be sick!

its been done.....by me =) check my page to see it =) shoots semi auto from a 5 round magazine and it is over 6 feet in lebgth
Permalink
| August 4, 2009, 2:30 am
Quoting Andrei Rozhin

yes that would be pretty sick, I'ma try to make one single shoot though, then, ill see what I can do.
i built 1 that shoots semi auto from a 5 round magazine, its over 6 feet long! please check it out on my page and if you want help with yours ask =)

Permalink
| August 4, 2009, 2:32 am
Quoting Jongejanssie Jongejanssie
The PTRS-41 is very cool gun, and twice as powerfull as a .50BMG rifle, but it has a length of 2,10 meters. So that's way too long. BTW I don't play playstation games, but I heard that the PTRS-41 scores 9,5/10 points in case of damage. So making a PTRS-41 is just a dream come true.

check my page, i built a full size firing PTRS-41
Permalink
| August 4, 2009, 2:37 am
Quoting chris legg

1.does some one know a good rubber band / brick shooting mech thats altleast semi auto

2. or a great working scope for snipers
yes, i also have an explanation for my semi/ full auto mech on youtube, and i am making instructions for my mech tomorow my channel is miklit23

Permalink
| August 4, 2009, 2:40 am
how about an m4a03 sniper there not so modern (i think)!
Permalink
| August 5, 2009, 8:58 am
Quoting Albert Kragl
I am thinking about making an MP5, but I don't know which mechanism to use. Please help!
http://www.mocpages.com/moc.php/65373
Permalink
| August 5, 2009, 1:03 pm
Quoting Albert Kragl
Actually I was hoping for a rubber band mech, so I was thinking of a rubber band mech. I don't think I could even make that mech. Sorry if I'm picky.

lol same here, i wanted to build a un with that mech, but its too freakin colmplicated! check my guns out they use a simple semi auto mech
Permalink
| August 5, 2009, 1:55 pm
 Group moderator 
I'm back for a solid week or building guns!

I've noticed that the biggest problem with most builder's .50 BMG Barrett rifles is the barrel. It sags, breaks, and ends up looking too squared off or too thin to be realistic.

So I am attempting to build the best barrel for large-bore rifles (.50 caliber), but it is very piece-inefficient. My current design requires 15 jumper plates for every 2-stud length. I have built a 28-stud-long barrel, using 420 jumper plates. There is no sagging, it looks round on the outside, and it has a 2-stud wide bore down the center (great for turning this into a shooting rifle). So far so good, but I'm completely out of jumper plates. Given the shorter 20" barrel of the M107, I need 540 more jumper plates. Time to go to BrickLink.

I'll post some more details on it's construction soon. Anyone have any ideas on how to build a good large-bore barrel before I spend my 'life savings' on jumper plates?
Permalink
| August 8, 2009, 12:19 am
Quoting Darcy Guerin Hanlon
yeah the Australian army use's AUG's there still in service

the aug is not a sniper rifle in itself. But the AUG a3 has a sniper variant with longer barrel, scope, and bi-pod. and the garand models w/ a scope are the M1C and M1D
Permalink
| August 8, 2009, 9:16 am
 Group moderator 
I haven't got any ideas left! Please give me an idea! I beg you all! Give me an idea for a SubMachine Gun, handgun or assault rifle. Please! And not too modern please. 1980's or earlier!
Permalink
| August 11, 2009, 5:27 am
Quoting Tom Jongejans
I haven't got any ideas left! Please give me an idea! I beg you all! Give me an idea for a SubMachine Gun, handgun or assault rifle. Please! And not too modern please. 1980's or earlier!

M1 Carbine
FG-42
STG-44
PPSh-41

Permalink
| August 11, 2009, 9:26 am
 Group moderator 
Quoting Chris A.
M1 Carbine
FG-42
STG-44
PPSh-41


I already done two of those lol. An STG would be sweet coming from Tom.

Permalink
| August 11, 2009, 10:56 am
 Group moderator 
Quoting Weston Wedeward

I already done two of those lol. An STG would be sweet coming from Tom.

Well, right now I'm thinking about a Russian (of course) PPS-43.
Permalink
| August 11, 2009, 11:37 am
That would be cool
Permalink
| August 11, 2009, 12:52 pm
 Group moderator 
Quoting chris legg
does any body know a to make a good pair of the rails sight things on m4's for my m20
I do. My recent HK416 models (v8 has better pics of the rail) have a rail system that has the same number of steps as the real thing and also works with plates that are 2,3,4-studs wide. The best way to create a continuous rail is to use 2x3, 2x6, or 2x12 plates as the base. I'll post instructions. For now, here's a pic: http://i82.photobucket.com/albums/j266/PythagoreanLEGO/HK416D14-5RS%20v8%20LEGO/HK416-v8-012L.jpg
Permalink
| August 11, 2009, 12:58 pm
Quoting PyBrick Replicas
Quoting chris legg
does any body know a to make a good pair of the rails sight things on m4's for my m20
I do. My recent HK416 models (v8 has better pics of the rail) have a rail system that has the same number of steps as the real thing and also works with plates that are 2,3,4-studs wide. The best way to create a continuous rail is to use 2x3, 2x6, or 2x12 plates as the base. I'll post instructions. For now, here's a pic: http://i82.photobucket.com/albums/j266/PythagoreanLEGO/HK416D14-5RS%20v8%20LEGO/HK416-v8-012L.jpg
I used that rail system and my FN2000 has exactly as many rails as the real steel (22)

Permalink
| August 11, 2009, 1:50 pm
 Group moderator 
Quoting chris legg
does any body know a to make a good pair of the rails sight things on m4's for my m20
Rail instructions: http://www.mocpages.com/moc.php/143915

Permalink
| August 11, 2009, 2:06 pm
I am going to attempt to do a WWII series of guns, like Weston W's Tribute series. I need help on what to call it as well as ideas for replicas to make.
Permalink
| August 11, 2009, 9:04 pm
 Group moderator 
Quoting Chris A.
I am going to attempt to do a WWII series of guns, like Weston W's Tribute series. I need help on what to call it as well as ideas for replicas to make.


Yeah! That is what I have been waiting for! Finally someone is going to do a WWII series! Here are some suggestions from my experience doing this. First of all, rifles and machine guns would be very expensive to buy off of LDD. So that is why I didn't do them. But a SMG group or a pistol group wouldn't be a bad idea. I don't mind if you do SMGs, cause they seem to be the cheapest method with the most bang!

Permalink
| August 11, 2009, 10:40 pm
Quoting Weston Wedeward

Yeah! That is what I have been waiting for! Finally someone is going to do a WWII series! Here are some suggestions from my experience doing this. First of all, rifles and machine guns would be very expensive to buy off of LDD. So that is why I didn't do them. But a SMG group or a pistol group wouldn't be a bad idea. I don't mind if you do SMGs, cause they seem to be the cheapest method with the most bang!

I'll do everything, I just won't buy the big ones.
Permalink
| August 11, 2009, 11:51 pm
Any ideas?
Permalink
| August 12, 2009, 12:24 pm
Does anybody know the width of an M1 Carbine? centemeterss or inches please.
Permalink
| August 13, 2009, 12:42 pm
 Group moderator 
Quoting Chris A.
Does anybody know the width of an M1 Carbine? centemeterss or inches please.


Oh, your going to do an M1 Carbine. Nice. I would say the stock width has to be six lego studs wide and the reciver 4.

Permalink
| August 13, 2009, 1:00 pm
Please watch my creations (PE-13).
Does somebody have an idea like me a shot mechanism in my weapon can insert?
Though she looks good, but she should be able to shoot already anyhow, but she is absolutely dull...
Indeed, I believe for it the optics strongly must suffer if I the mechanism wants to insert...
Well, I hope you can help me!
Thank you
Permalink
| August 16, 2009, 9:53 pm
Quoting Jongejanssie Jongejanssie
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


JJ, Any more ideas for a gun that is mostly gray but no brown?? Thanks!

Permalink
| August 17, 2009, 4:26 pm
 Group moderator 
Quoting Milan CMadge
Quoting Jongejanssie Jongejanssie
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


JJ, Any more ideas for a gun that is mostly gray but no brown?? Thanks!

What kind of gun do you want? Big? Compact? SMG, machine gun, assault rifle, handgun?
Permalink
| August 17, 2009, 4:43 pm
Quoting Tom Jongejans
What kind of gun do you want? Big? Compact? SMG, machine gun, assault rifle, handgun?


A compact SMG or a sniper. The Mac 10 could be good. - but I have loads of light gray to use.
Permalink
| August 17, 2009, 4:50 pm
 Group moderator 
Quoting Milan CMadge

A compact SMG or a sniper. The Mac 10 could be good. - but I have loads of light gray to use.


Barrett M82A1 (LOL)
IMI UZI
Colt 9mm SMG
H&K CAWS
H&K UMP .45
Browning M1919A4
Lewis .303
Sterling SMG
STEN MkIII
Ingram MAC10
M3A1
MP40
MAT-49
Vigneron M2
Sturmgewehr 44
Hotchkiss M1914
Degtyarev DPM

Hope you have enough ideas.
Permalink
| August 18, 2009, 5:10 am
Quoting Tom Jongejans

Barrett M82A1 (LOL)
IMI UZI
Colt 9mm SMG
H&K CAWS
H&K UMP .45
Browning M1919A4
Lewis .303
Sterling SMG
STEN MkIII
Ingram MAC10
M3A1
MP40
MAT-49
Vigneron M2
Sturmgewehr 44
Hotchkiss M1914
Degtyarev DPM

Hope you have enough ideas.


Thanks, I'll probably make the Sterling
Permalink
| August 18, 2009, 5:54 am
Can someone give me an idea for a small gun?
Permalink
| August 21, 2009, 2:01 pm
 Group moderator 
Quoting lol wut ?
Can someone give me an idea for a small gun?

Hehehe... A Colt .25 Automatic 1908!
Permalink
| August 21, 2009, 2:04 pm
 Group moderator 
Specially for Milan:

Walther P5
Walther P38
Tokarev TT
Colt M1911A1
Sig Sauer P220
Colt Python
Colt SAA
FN Browning M1903
FN Five-seveN
Colt M1908 .25 Automatic
FN Browning HP
Mauser C96
Desert Eagle .50 AE
Webley-Fosbery .455
Colt Police Positive .38

Permalink
| August 23, 2009, 5:25 am
Quoting Tom Jongejans
Specially for Milan:

Walther P5
Walther P38
Tokarev TT
Colt M1911A1
Sig Sauer P220
Colt Python
Colt SAA
FN Browning M1903
FN Five-seveN
Colt M1908 .25 Automatic
FN Browning HP
Mauser C96
Desert Eagle .50 AE
Webley-Fosbery .455
Colt Police Positive .38


Wow thanks!
Permalink
| August 23, 2009, 6:20 am
Quoting Tom Jongejans
Specially for Milan:

Walther P5
Walther P38
Tokarev TT
Colt M1911A1
Sig Sauer P220
Colt Python
Colt SAA
FN Browning M1903
FN Five-seveN
Colt M1908 .25 Automatic
FN Browning HP
Mauser C96
Desert Eagle .50 AE
Webley-Fosbery .455
Colt Police Positive .38

I'm definitely going to make the Colt M1908 .25 Automatic!!


Permalink
| August 23, 2009, 6:53 am
 Group moderator 
Quoting Milan CMadge
I'm definitely going to make the Colt M1908 .25 Automatic!!


Hehe, that little beauty (100 mm long)
Permalink
| August 23, 2009, 7:39 am
Can anyone give me instructions for a good mech for my Glock 19 Compact V8?
I can't do one on myself...
Permalink
| September 7, 2009, 1:37 pm
Quoting Sho ot
Can anyone give me instructions for a good mech for my Glock 19 Compact V8?
I can't do one on myself...

Jack Streat's will be good!
- http://mocpages.com/moc.php/119959
Permalink
| September 22, 2009, 2:44 pm
Quoting Jongejanssie Jongejanssie
I made this topic so we can help each one who's stuck on a gun idea. So, if you son't know what to make, ask it here.


I'm stuck on a sniper problem. Does someone know a not-so modern sniper rifle, wich is semi-auto, and with a maximal lenght of 1,10 meters?


Build it!
http://world.guns.ru/sniper/sn67-e.htm
Permalink
| September 22, 2009, 2:45 pm
I have 2 questions:

1. How do I build a blowback mechanism for a pistol?

2. How do I show a bullet when I slide the slide of a pistol back?
Permalink
| October 22, 2009, 10:43 pm
Do you know how to make full auto gun? I can help you.
Permalink
| January 1, 2010, 8:56 am
Quoting Sho ot
Can anyone give me instructions for a good mech for my Glock 19 Compact V8?
I can't do one on myself...

Do you want create semi or full auto?
Permalink
| January 1, 2010, 12:28 pm
Other topics



LEGO models my own creation MOCpages toys shop Gun SmithsWeapons


You Your home page | LEGO creations | Favorite builders
Activity Activity | Comments | Creations
Explore Explore | Recent | Groups
MOCpages is an unofficial, fan-created website. LEGO® and the brick configuration are property of The LEGO Group, which does not sponsor, own, or endorse this site.
©2002-2014 Sean Kenney Design Inc | Privacy policy | Terms of use